How is the head of the purification swab joined with the rod?
The common purification swabs in our daily life are made of cotton, and the purification swabs we will mention here are basically used in industrial production. We all know that cotton is directly wound on the rod, so how is the industrial purification swab joined? Jiebai purification Xiaobian tells you the following ways!
The first one is to stick the head of the purification swab directly onto the rod
Some manufacturers will use glue, some manufacturers will use other sticky materials, the result is as long as the head stick up, to ensure that it will not fall on the line. Although this kind of manufacturing process is very convenient to produce, it can't be used at all when it is used in industry. Because they will have some residues on them, which will cause the residues to fall onto the products, forming secondary pollution and poor cleaning effect.
The second is the principle of hot sealing
First, use hot air to press the head of the purification swab, and our purification swab uses this manufacturing process. Because a part of the dust on the
Cotton Swab can be blown off by hot air, and the head of the cotton swab and the rod of the cotton swab are more closely connected, leaving no residue, the cleaning effect is good. Longer time to use!
Third: the use of ultrasonic production
The principle is that the high-frequency vibration wave is transmitted to the surface of two objects to be welded. Under the condition of pressure, the two surfaces collide with each other to form the fusion between the molecular layers. Although the quality of cotton swab produced by ultrasonic is the best, its cost is not low
In the production process of purifying swab, it needs to go through layers of technology, such as the manufacturing of swab rod, the hot pressing of swab head and the clarity. Through each process, if the quality of the swab itself is not very good, it will present a large number of burst phenomenon.
What is a cotton swab burst? Careful friends may find that all the dust-free swabs are hot pressed when using swabs. However, some of them are not up to the standard due to the lack of technology, resulting in the head sponge cracking when packing or cleaning. This is the so-called swab burst.
Why is there a clean swab burst? The following is the reason why the cotton swabs burst
1. The quality of raw materials (sponges) used is not up to the standard. Because sponges are also graded, some purification swab manufacturers purchase low-grade sponges in order to save cost, which leads to a simple burst of swabs.
2. Process technology can not reach, hot pressing level is not mature enough, only the right hot pressing level can guarantee the quality of cotton swabs. If the temperature of hot pressing is too low, the head of cotton swab can't blend effectively. If the temperature is too high, the head of cotton swab will be damaged.
3. Another point is that the cotton swab manufacturer does not have strict quality control. If the production process is strictly standardized and the production requirements of workers are improved, this kind of phenomenon can also be prevented.
Purification swabs are exploding, which will not only lead to the rise of enterprise capital, but also lead to the harm of enterprise reputation. For Jiebai purification, paying attention to the improvement of product quality will also make the purification swabs of our enterprise get the recognition of customers!
