The production process of
Medical Cotton Swabs With the improvement of medical and health level in China, the medical cotton swabs of common medical things have irreplaceable position in medical disinfection and sampling. Because of the large demand of medical cotton swabs, the production of medical cotton swabs is also particularly important. The method of making cotton swabs by hand is unable to meet the increasing demand. In order to improve the production power of medical cotton swabs, we should choose cotton swabs to make machinery instead of handcraft cotton swabs.
The method and step of the mechanized medical cotton swabs are more stringent, and the quality of medical cotton swabs can be better ensured. After the compression and cutting of the strip cotton, the medical
Cotton Swab making machine contacts the swab rod through the delivery organization and rolls the cotton. Can be separated into five steps, separation is: delivery, cotton pressure, cotton cutting, delivery of the sign and roll cotton. The first step is to send the strip cotton into the machine at a certain time. The second step is to press the incoming strip cotton to prepare for the third step of cotton cutting. The third step is to cut down the fixed length of the cotton in time. The fourth step is to send the tag to the guide cotton Cao and contact the cotton strip. Finally, the fifth step of the final step is to roll the cotton, rotate the swab and move along the guide slot to complete the cotton roll.
The production of medical cotton swabs
The specific method of feeding surface is to send strip cotton through the machine cam to the track, and the cam is the active cam. The cam in the machine is connected and rotated, but only one quarter of the contact surface with the strip cotton. The advantages of this method can transform the motor connection motion into intermittent motion.
The crank slider structure is selected for cotton pressing, and the cotton pressing is realized by the movement of the slider. The advantage of this method is that the structure is relatively simple, but the defects are obvious. It is difficult to add an intermittent transmission organization to the crank.
The cotton pulling is a quarter of the circular cam and cam contact roll to realize the cotton pulling. The advantage of this method is to compress noodles, which is more convenient and quick to roll cotton next time.
The delivery of the tag is to constrain the passage of the stick by one by one by the funnel mouth, and then the delivery member roller under the funnel mouth will send one of the tags away. The advantage of this method is that the action is definite, and the cotton roll will be relatively stable, and the probability of error is minimized.
When the cotton is rolled, the belt pulley rotates and the rocker swings to realize the relative movement of the upper and lower surfaces. At the same time, the swab rotates itself under the action of friction force to realize the cotton roll. The advantages are simple structure and convenient roll cotton.
